DEGASET AX 5000 Series

High Water Reducing / New Generation Superplasticizer Concrete Admixtures

PRODUCT DESCRIPTION

DEGASET AX 5000 SERIES products are polycarboxylate polymer based high water reducing / new generation superplasticizer concrete additives used to increase the workability and mechanical properties of concrete by reducing the water / cement ratio. Summer (S) type products have the feature of delaying setting (consistency protection) in hot weather. Winter (W) type allows concrete casting in cold weather conditions. In addition, the products in this product group are also available in concentrated form (CONS). DEGASET AX 5000 SERIES products have more water cutting and consistency protection features compared to other sub- series groups.

TECHNICAL PROPERTIES

Chemical Base

Polycarboxylate based

Color / Appearance

Homogeneous liquid

Chlorine Content (%)

<0,1 (EN 480-10)

Alkaline Content (%)

<10 (EN 480-12)

Corrosion Behavior

Contains only components according EN 934-1 Annex A.1

Dangerous Substances

Comply with annex AZ

COMPLIANCE WITH STANDARDS

Degaset AX 5000

EN 934-2 Table 3.1 – 3.2

ASTM C 494 Type F

Degaset AX 5000 S

EN 934-2 Table 11.1-11.2

ASTM C 494 Type G

Degaset AX 5000 W

EN 934-2 Table 3.1 – 3.2

ASTM C 494 Type F

Advantages
  • Improves concrete’s early and ultimate compressive and tensile strengths and impermeability to water.

  • With its high range water reducing capabilities, enables concrete production with low water / cement ratio.

Makes corrosion free concrete production possible.

  • Enables concrete production with low water / cement ratio free of bleeding and segregation risks.

  • Minimizes formwork striking time.

  • Increases abrasion resistance of concrete by minimizing segregation and bleeding.

  • Shortens application time of resin based flooring systems on fresh concrete.

  • Increases freeze-thaw resistance of concrete.

  • Easy placement of formwork saves energy from vibration labor.

  • Easy setting to densely reinforced sections and impermeable concrete production with smooth surface finish.

  • Enables early high strength concrete production in low temperatures.

  • Compatible with all cement types.

Areas of Use
  • Ready-mixed concrete production (with or without pump)

  • Self-compacting concrete production

  • Production of concrete that can easily set to densely reinforced concrete elements

  • Production of various types of concrete such as reinforced, unreinforced, light or normal concrete

  • Injection and casting applications

  • In precast and prefabricated production

  • High performance concrete production

Terms of Use
  • DEGASET AX 5000 SERIES products are recommended to be added to the mixing water in ready-mixed concrete production plants. It should not be added directly to the dry mixture.

  • If it is added directly to fresh concrete, the mixing time should be extended for at least 1-2 minutes at fast speed to ensure sufficient homogeneity or this time should be determined in laboratory trials.

  • When more additives are used than the specified range of use, it may affect the setting time of the concrete. In such cases, a preliminary test should be done in the laboratory.

Usage according to weather conditions;

  • In Summer: Degaset AX 5000 S      • In Winter: Degaset AX 5000 W     • At Normal Temperature: Degaset AX 5000

Consumption Dosage

DEGASET AX 5000 SERIES products’ dosage should be adjusted according to the total amount of binder in the mixture design. This ratio varies according to the cement, aggregate, mineral additive, water components used in concrete mixture design and also the desired fresh and hardened concrete properties. Therefore, before determining the usage rate, laboratory tests should be made according to the properties expected from fresh and hardened concrete and the mixing ratio should be determined according to these tests.

Method of Application

Aggregates and the binder (cement-silica fume-fly ash-blast furnace slag) should be mixed until obtaining a homogenous mixture. After adding 70% of mixing water into the dry mixture, DEGASET AX 5000 SERIES products should be added into the rest of water and should be mixed properly

Compatibility with Other Admixtures

DEGASET AX 5000 SERIES products can be combined with the following admixtures. Laboratory tests should be carried out before use.

  • Arset Air Series
  • Arset Doz Series
  • Arset Friz Series
  • Arset Fast Series
  • Arset Retard Series
  • Arset Waterproof Series
  • Arset Zero Series

 

Packaging
  • 30 kg plastic drum
  • 250 kg drum
  • 1000 kg container
  • Bulk
Storage and Shelf Life

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost.

If the product has waited for a long time, make it homogeneous by mixing it mechanically before using it.

Make sure that the product does not freeze. If the product freezes, it should be thawed by keeping it at room temperature without using direct heat and mixed by mechanical methods until it becomes homogeneous.

Safety Measures

Use protective clothes, gloves, glasses and mask compatible with health and safety regulations during the application. Avoid direct contact with eyes and skin during storing and application, in case of contact wash off thoroughly with soap and water, if ingested seek medical attention immediately. Store away from all foodstuffs. Keep away from children. DEGASET AX 5000 SERIES products are not flammable. For detailed safety information please consult the product’s Safety Data Sheet (SDS).

PRODUCT OF

SERIES

You can contact us to access the Safety Data Sheet.