Re-dosing Concrete Admixtures


ARSET DOZ SERIES products are a concrete consistency regulating re-dosing admixture that is mixed to concrete on site to improve pumpability and placing of concrete with low consistency.


Chemical Base

Polymer based

Color / Appearance

Homogeneous liquid

Chlorine Content (%)

<0,1 (EN 480-10)

Alkaline Content (%)

<10,0 (EN 480-12)

Corrosion Behavior

Contains only components according EN 934-1 Annex A.1

Dangerous Substances

Comply with annex AZ

Arset Doz Series     TS EN 934-2    
  • Improves workability of concrete with low consistency.

  • Ensures workability of concrete by increasing the lost viscosity without addition of water

  • Prevents strength loss of concrete.

  • Shortens pumping time.

  • By improving concrete consistency, it makes pumpability possible.

  • Do not contain chloride or any other components that result in corrosion in the reinforcements. Therefore, it is suitable for use in reinforced concrete structures.

Areas of Use
  • Ready mix concrete and in pouring precast concrete

  • In eliminating loss of viscosity due to hot, windy and humid weather

  • In pouring concrete with a long period of delay

Terms of Use

ARSET DOZ SERIES products used by directly mixing into the concretes which has difficulty compacting due to loss of viscosity.

Consumption Dosage

ARSET DOZ SERIES products’ dosage should be adjusted according to the total amount of binder in the mixture design. This ratio varies according to the cement, aggregate, mineral additive, water components used in concrete mixture design and also the desired fresh and hardened concrete properties. Therefore, before determining the usage rate, laboratory tests should be made according to the properties expected from fresh and hardened concrete and the mixing ratio should be determined according to these tests.

Method of Application

ARSET DOZ SERIES products used by directly mixing into the concretes which has difficulty compacting due to loss of viscosity. After the admixture is added to the concrete, further mixing within the truck mixer obtaining at the maximum speed (~15 rpm) for 3 minutes is required for homogenous mixture. After adding ARSET DOZ upon validating by slump testing and observation, if the required slump level is obtained concrete pumping can be started.

Compatibility with Other Admixtures

ARSET DOZ SERIES products can be combined with the following admixtures. Laboratory tests should be carried out before use.

  • Arstep / Arstep Extra/ Degaset Series admixtures
  • Arset Air Series
  • Arset Zero Series
  • 30 kg plastic drum
  • 250 kg drum
  • 1000 kg container
Storage and Shelf Life

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost.

If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product.

Make sure that the product does not freeze. If the product freezes, it should be thawed by keeping it at room temperature without using direct heat and mixed by mechanical methods until it becomes homogeneous.

Safety Measures

Use protective clothes, gloves, glasses and mask compatible with health and safety regulations during the application. Avoid direct contact with eyes and skin during storing and application, in case of contact wash off thoroughly with soap and water, if ingested seek medical attention immediately. Store away from all foodstuffs. Keep away from children. ARSET DOZ SERIES products are not flammable. For detailed safety information please consult the product’s Safety Data Sheet (SDS).



You can contact us to access the Safety Data Sheet.